TECHNICAL INSPECTION
Industrial engineering company Fhamh With the support of years of experience and activity in the country's industry and by obtaining the necessary permits and approvals from the competent authorities:
Inspection of oil, gas and petrochemical equipment
The Vice President of Petroleum, Gas and Petrochemical Company of Fahameh Engineering and Industrial Company has expanded its activities in cooperation with international companies with the aim of developing specialized areas of company supply, inspection and training in cooperation with international companies in the above areas..The main activities of this deputy are as follows:1. Business consulting, supply of goodsIn the area of supplying oil, gas and petrochemical equipment, the deputy has been negotiating with many of the equipment makers needed by the industry in Canada, Europe and Asia and has signed a representative contract with some of them. .٫ ٫ Quality Control Inspection and Services2. Training
Elevator and escalator technical inspection
Due to the increase in the use of elevator in the building industry and the risks caused by incorrect and non -installation StandardThe necessity of ensuring and increasing the personal and public safety factor in the elevators being installed and installed based on the requirements of the National Standards Organization of Iran has been made mandatory. .By formulating standard elevator requirements, Fahameh Company One of the first approved companies was competent in this regard, which began operating at the same time, across the country. .Considering the large volume of elevators with a lifespan of more than 20 years, in addition to the mandatory annual control and maintenance contracts with companies active in this field, periodic inspections of elevators in the country in order to Control، Supervision And authentication Quality of service Service and maintenance And the safety status of the elevators at a higher level by the approved companies in this sector is a mandatory necessity by the Fahameh Elevator Specialists Ease of Elevator..Fahameh's group of experts, relying on their technical knowledge and valuable experience in other similar products of this branch, including :
Technical Inspection of Electric crane &Lift truck
Fahame's group of experts, relying on their technical knowledge and valuable experience in other similar products of this branch, including:
Vehicle and Parts Inspection
Fahameh Industrial Engineering Company of Automotive Supervisory Arm Process and Product:For more than 5 years, the seizure of car manufacturers and their parts suppliers, as a trusted representative and inspector, monitors the process of manufacturing of domestic automobile parts .Fahameh
With the backing of years of collaboration with automotive parts manufacturing companies: Sazeh Gostar (Saipa) And Sapco (Iran Khodro), In the fields :
Inspection of CNG compressed natural gas stations
In order to increase safety and ensure the correct way and optimal quality of fuel supply, as well as respecting the rights of consumers, all fuel distribution stations (CNGGasoline and ...) Required to comply with mandatory technical standards in connection with :
Vehicle and motorcycle type inspection
All the cars that are produced in the country or imported to the country for the first time, as well as all the domestically produced cars that have not been able to get the car type approval so far in order to be allowed to drive in the country.(be numbered) They should proceed to obtain the approval of the car type.Verification of the type of vehicle:Approval of production samples of a design, based on the requirements and established standards.Obtain inspection certificate(car) It is required during clearance for all types of imported and exported cars.All motorcycle models, before they reach the production stage, must comply with the mandatory national standards for motorcycles, which are compiled by the National Standards Organization of Iran, and have "Type approval" to confirm the type of motorcycle, that is:Examining the documents of a type of motorcycle based on the 25 mandatory standards of the National Standards Organization of IranFahameh company, relying on its experiences and brilliant records in the field "Car and motive power "In addition to the above mentioned, it is ready to provide the following services to customers :
Inspection to determine energy consumption criteria
Conducting an inspection to determine energy consumption standards in industrial units and buildings, in order to measure compliance with the legal requirements of international energy management system standards, reduces energy waste and costs and, as a result, increases productivity..Therefore, paying attention to the management of energy consumption and increasing the efficiency and productivity of energy in industries and buildings has become an inevitable necessity. The results of the study in the field of consumption and the perspective of the future supply and consumption of energy in Iran indicate a waste of 20-30% of different types. is energy.Providing cheaper energy, Cleaner and renewable means a better and healthier tomorrow for our children. Therefore, optimizing the consumption pattern.In the industry with a purpose:
The process of inspection services to determine energy consumption criteria
Conducting inspection services to determine energy consumption criteria includes four parts:
- Extraction of production information
- Extraction of energy consumption information
- Information validation
- Special energy consumption calculations and compliance with the standard
1. Collecting information and statistics of product production
- Knowledge of production processes
- Gathering information about the consumption of raw materials
- Statistics related to production and final products in all sectors
- Waste statistics
2. Collecting energy consumption information
- Identification of energy carriers and how to distribute them in the industrial unit
- Collect energy consumption information in a certain period of time
- Investigating the supply and circulation system of energy carriers in the industrial unit
3. Information validation
Selection and use of conventional tools and methods based on the type of information and nature and status of industrial units to evaluate and validate the information collected by energy technical inspectors
2. Completion of calculations and compliance with industry and production standards
Energy technical inspectors use energy consumption calculations using the methods set forth in the standards of each industry and eventually adapt to the national standard of the consumption..
CIA
In the industry part, including:
- Dairy industries (According to National Standard 1)
- Manufacturer and juice (Based on the Standard 1)
- Compote (Based on the Standard 1)
- Industrial Greenhouses (Based on the Standard 1)
- The manufacturing industries and the process of lead and zinc (According to the Standard 1)
In the building segment containing :
- Residential Buildings_Stride Energy Label(استانداردملی۱۴۲۵۳)
- Non-residential buildings - energy label guidelines(استانداردملی۱۴۲۵۴)
Fahameh, with its wide network of experienced inspectors, is ready to provide services nationwide..
Inspection of knowledge -based products
In order to increase the quality Knowledge -based products, Year 2 Vice President of Science and Technology With National Iranian Standards Organization The style sheet about Evaluation and adaptation of knowledge -based products With national, international or declared features of manufacturing units Knowledge Base, Have compiled.
Fahameh from First companies TECHNICAL INSPECTION That is from year 2, with General Directorate of Standards of Tehran Province In the direction of issuance Certificate of Certificate of Knowledge -Based Products He has cooperated.
According to the type of request submitted by Knowledge -based companies، ASSESSMENT & COMPLIANCE The products of these companies in the productive branches of goods:
- Mechanical
- Electronic
- Medical Engineering
- Software and hardware
- Chemical or metallurgy
To issue certificates:
- KB-COC Based on one Standard Acceptable
- KB-COP Based on one or more properties stated by the manufacturer's unit Knowledge -based product
Item Evaluation And audit Is placed.
Steps to obtain a certificate Standard Knowledge Products(Symbol knowledge):
- Registration on the Vice President of Science and Technology by the Production Unit
- Complete the request for the request. Product compliance certificate And submit to the inspection company
- Product testing by an accredited laboratory in accordance with Standard or declarative features
- do Inspection by Fahame company experts
- Forming a technical committee in the provincial standard departments for issuance Product compliance certificate
For more information, you can contact the unit Inspection Products Knowledge Base Fahameh, please call 9-88106145 extension 454.
Inspection of nanotechnology products
Nano badge A special national emblem Nano technology productsIt is suggested Special headquarters for the development of nanotechnology and with Cooperation of the National Standard Organization of Iran with a purpose:
- Improving quality and reducing counterfeit products in the market
- Making consumers confident about the quality and safety of nano products
- Assisting and benefiting from the support of Nano Headquarters
and helping manufacturing companies to develop the market and export their products to the market of other countries according to the international validity of the certificates issued by National Iranian Standards Organization , designed and planned and approved Supreme Council of Standards has also arrived.
in granting permission to use Nano badgeThe nanoscale and claimed characteristics of the manufacturing company are evaluated and confirmed in relation to nanotechnology and in some cases, product safety..
Fahameh , the first technical inspection company partner of the country's Nano Development Headquarters and approved by the National Standards Organization of Iran, is proud to work in this field..
Requirements and the process of obtaining a license to use the Nano logo :
- Having a valid national standard license
- Review and approval of primary documents
- Inspection, sampling and testing by a reputable inspection company
- Approval of Documents by a Specialized Committee on Nanotechnology and Provincial Symphs Committee
And in the end, the granting and licensing of the use of nanotechnology for the manufacturing company is for three years.
For more information, you can contact Fahameh Nano Technology Products Inspection Unit at 9-88106145 extension 359.
