The difference between standard and non -standard helmet
Work Health
First safety, then work ! (The importance of using a helmet)
It is interesting to know that on Helmet, Types Functional tests And safety Performed to make of quality It is assured.
Some. Functional-II tests Inclusive:
- Impact absorption
- Insulation against electricity
- Penetration
- Resistance to flammation
- Resistance to metal lava
Remember that: Knowing safety tips is not enough! To act to them..
Helmet
The World Standard of Hat Salvation Colors
The paint of the helmet, From one World Standard Follows in the engineering world! Because each person's degree and duty are different in the workshop environment, and each person is working in the workshop environment and is responsible for their duty..
One of the most important functions The color of the helmet. Work in workshop, construction, industrial and …”Identification of the workshop officials” For example, suppose that an accident in the workshop environment is created in the electricity or fire sector, among the executives, the first thing that makes the responsible responsible is identified, the same color scheme Helmet Is to increase the speed of identifying the person in question and the appropriate reactions.(Related)
Hat work
The difference between the colors of the work helmet based on International Standard:
- White: This color is used for high -end employees such as engineers, managers, supervisors, etc..
- Yellow: This color is the most widely used color in development workshops and other Projects Is, this color represents the main and large workshop of the workshop, the workers.
- Red: This color is intended for fire and firefighters.
- Green: This color represents the technical service staff and Safety officials Projects.
- Blue: This color represents the staff of the repair department, power technicians, carpentry and other technical operators.
- Brown: This color is intended for staff and workers working in high heat environments and welders intended.
- Gray: این رنگ برای میهمانان، بازدیدکنندگان و پیمانکاران در نظر گرفته‌شده است.
Helmet یکی از انوع رایج تجهیزات حفاظت فردی (PPE) is. از این جهت، اطلاع از استاندارد ها و الزامات Build Helmet برای همه کاربران، مهم و الزامی است.
one کلاه ایمنی استاندارد،باید بتواند در مواجهه با ضربه ، نفوذ گرد و غبار ،آتش و حرارت ، جذب آب و الکتریسیته،از فرد، محافظت کند! طبق قوانین ایمنی بین المللی، تمامی کلاه های ایمنی استاندارد, Must be able to handle these challenges, however, in some specific working conditions, some of these features in manufacturing Helmet Do not observe! That should be mentioned in the helmet manual!
Of standard helmet features:
- Simple and clear recipes in which the correct adjustment and replacement of the head and suspended strip is explained..
- In general, standard safety helmets must have a solid outer shell and a layer of impact absorbent and a hat should be embedded in a strap or strip around the head, to keep the hat outer shell at a distance of 1/2 ۱۱/5 cm from the head.. This designHague safety Causing shock shock during collision and ventilation below Helmet While wearing a hat, it is important that any helmet should be replaced regularly every 5 years if used in normal conditions..
Standard
But the last thing is that:You can List of standard and approved safety helmets , As well as the list of other approved personal protection equipment Technical and Health Protection Research Center ،بهمراه مدل،نوع کاربرد، برند های معتبر و سایر اطلاعات تکمیلی را Here مشاهده نموده و با اطمینانِ خاطر، نسبت به خرید کالا اقدام نمایید.