Standard Knowledge Products (KB)

With cooperation Vice President of Science and Technology And National Iranian Standards Organization ، The standard mark of technological products with the title of Knowledge Symbol To Products of knowledge-based companies , who have the necessary conditions, will be granted.

Knowledge -based product quality control

Standard Knowledge Products (The certificate of knowledge of the symbol) It can be an effective step in commercialization and entry Knowledge -based products to the market, as the main challenge facing knowledge-based companies. ISO Certificate of compliance (KB_COC) and or Product certificate (KB-COP)To Knowledge -based products This possibility to Knowledge based companies Gives up even without existence National Standard by using Valid International Standards or a factory of National Standards Organization, a valid certificate for Product approval find out that it is also valid in many countries of the world.

Standard inspection of knowledge-based products

Fahameh ، Partner Inspection Company General Directorate of Standards of Tehran Province In the field TECHNICAL INSPECTION Knowledge-based products from 2016 until now Appreciation Have been Vice President of Science and Technologyin line with the implementation of the system Standardization of knowledge-based products and services in the country.

Knowledge Base

In order to organize Standard and helping knowledge-based products enter the market, Certificate of conformity or product certificate To Knowledge -based products is issued.The certificate of knowledge of the symbol It can be an effective step in commercialization and entry Knowledge -based products to the market as the main challenge facing knowledge-based companies…(Read more)

GOODS INSPECTION

with consultations Scientific and Technological Vice President، Customs facilities significant to Knowledge -based companies This letter of support is only for Knowledge -based products It is exported. Issuing permits for temporary entry for processing, up to the annual nominal capacity Knowledge based company It is the manufacturer or producer of goods that is approved by the secretariat of the working group…(Read more)

KB ؛ COC ؛ COP ؛ Nano ؛ audit ؛ISO certificate ؛Investment advice

Rail Industry

In the fleet Rail transport, road accidents are less and we can say that we see very few accidents. Cost reduction is another advantage of this type Transportation It can be mentioned. Transportation of passengers and goods Rail transport Compared to other fleets, it leads to a somewhat lower cost. For example, the load of every 5 trucks is moved with one wagon, as a result, costs are reduced..

Feasibility studies (Technical-Economic)

Given the importance Rail transportSpecial attention should be paid to this in developing the country's development plans. can be performed Rail transport It is one of the effective ways to improve the pollution situation and reduce the volume of traffic, because there is a large volume of traffic on the roads of the province, which is caused by car will solve those who pass through this city.

Light City Train or LTR (Light Rail Transit)

These light trains usually consist of one to three cars and use electricity to move on a protected track on the surface of the ground, underground or above the ground.. Standard InternationalThe passenger carrying capacity for this method has been set at 4,000 to 12,000 people per hour.

Head of time interval:to the time between the departure of a train from the station and its arrival Train Next to the station head the time interval(Headway) They say.

The third rail:to the rail that directs the electric current through the receptor, the third rail (Third Rail) They say. This rail is usually made of steel, in which there are also aluminum alloy compounds and a small percentage of carbon.

Sign system (Signaling) can be considered as one of the most important systems in securing trains. This system is responsible for the protection of trains. This system prevents them from colliding with each other by checking the trains and issuing the necessary orders. Also, one of the other duties of this system is to stop the trains when they reach the stop signal and control the train in the arches and inside the station..

TECHNICAL INSPECTION

Fahameh Industrial Engineering Company,Technical inspection company of theVoting for approval rating from the intelligent comprehensive system of the technical and executive system of railways C.A. Titled Supervisor to supply and supply parts of cargo-wagons Country trains.

ASSESSMENT & COMPLIANCE ؛ GOODS INSPECTION ؛ Standard inspection ; Engineering inspection

Standard and safety of railway lines

The train wheel laser profiling device, the main work of this device is collecting and measuring information Engineering The profile of the train wheel is the profile of the train wheel to the curve train wheel At the place of contact with the rail, it is said that it plays a very important role in the transfer of load Static and dynamic train to the rail and also prevent the wheel from leaving the rail…

requirement or demand (Requirement)

The desired quantity to measure.

size ten (Measurrand)

It is a document based on whichCompliance of the product with technical standards or regulations It will be announced.

metrology (Metrology)

The science of measurement and its application.

Measurement (Measurement)

The process of determining one or more quantitative values ​​through test, which can be reasonably attributed to a quantity.

source: standard.ac.ir

Issuance of ISO certificate ؛ASSESSMENT & COMPLIANCE ؛ Standard inspection; forgoods inspection

Part 5 (Previous section) You can also read this topic Here Read it.

Engineering inspection

The main task of this device, withdrawal and measure information Engineering Is a train wheel profile.Profile The train wheel to the curve of the wheel Train At the site of the rails, it is said to be a very important role in the transfer of static and dynamic load Train To Rail As well as preventing the wheel from leaving the rails.

Rail Industry

This curve, several parameters Engineering Including length, width, height, curved slope at different points that according to International standards Their values ​​should not be fueled by the values, and otherwise the possibility of exiting Train Rise from rails; As a result, these engineering parameters must be regularly in the process of maintaining the monitoring train(Monitoring) Become.

Inspection of rail industry equipment

So far three generations of these parameters Engineering The first generation of these parameters was used up to 5 years ago, in which the ruler of the measurement was used and then in the second generation of the second generation. ‘Contact information harvesting technology‘ It was used as the curved information was removed from the train wheel and this curve was somehow reproduced.. The third generation of these parameters Engineering About 5 years of their lives, laser shooting on the wheel surface Train Operates and converts train wheel information into numeric data using image processing technique.(Related)

Standard and safety of rail equipment

this Technology It has previously been owned by five countries, France, Germany, Austria and Japan, but what makes this technology unique in the world is that in addition to withdrawing information Engineering The train wheel profile is able to measure the wheel diameter simultaneously.

One of the most important achievements of this device: Disconnect dependence on foreign technology, increased safety Part of the train, saving wheels and preventing resource loss, can be called.
source:Irena

Industrial engineering company Fhamh, Technical Inspection Company Qualifying from Comprehensive Smart System of the Technical and Executive System of the Railway Titled Supervisor to supply and supply parts of cargo-wagons Country trains.(Other related material)

Quality engineering; Inspection of goods; Third -party inspection; Inspection during construction

Symbol knowledge standard

In this Project 75% of the electric driving forces are domestically made and localized and designed and made in Iran Project with support Vice President of Science and TechnologyResearch Institute car, fuel and environment of Tehran University in cooperation with one Knowledge Base Company and a company automobile manufacturing done.

Car and motorcycle inspection

Fahameh , honored by the scientific and technological deputy of the presidency in line with the implementation of the system Standardization of knowledge-based products and services in the country and partner inspection company General Directorate of Standards of Tehran Province In the field of technical inspection of knowledge-based products since 2016.

Vehicle and Parts Inspection

Standard Knowledge Products (The certificate of knowledge of the symbol) It can be an effective step in commercialization and the introduction of knowledge -based products into the market as the main challenge facing knowledge -based companies.. ISO Certificate of compliance (KB_COC) and or Product certificate (KB-COP)For Danesh-Baniyan products, it gives the possibility to the Danesh-Baniyan company, even without a national standard, using valid international standards or a factory of National Standards Organization, a valid certificate for Product confirmation find out that it is also valid in many countries of the world.

Standardization of knowledge-based products

Certificate of compliance (COC) This ensures that the product in question complies with the relevant standard. Product certification (COP) It also includes production conformity and continuous production capability of products, according to specifications, safety and performance characteristics and quality requirements and marking in type approval. In the conformity assessment certificate (COC) The product is tested based on the manufacturer's statements or existing national and international standards.

Inspection of equipment and imported goods

In product certification (COP) Also for knowledge-based products that National Standard or international, and it is issued based on the manufacturer's self-declaration. With the cooperation of the Vice President for Science and Technology and the National Standard Organization, the standard mark Technological products as knowledge symbol to products Knowledge based companies who have the necessary conditions, will be granted.

ASSESSMENT & COMPLIANCE ؛ GOODS INSPECTION ؛ TECHNICAL INSPECTION