National justification and production plans
National justification and production plans
Investment advice
There is nothing but a way out of the disease that has reached our industrial and production sector Preparation of explanatory plans! ( Feasibility of plans), something that has been neglected in our country, if it can easily prevent bankruptcy and closure of production-industrial units..
Feasibility studies
We have to know that Explanatory plan Gives a pristine opportunity to managers before any Investment And waste of resources, consider the planned solutions and with full awareness of what is on the way Investment They are located and provide the right solution and decisions in Justifications Written, see the future of your industrial production idea clearly and the unexpected encounter of performance Banks And the governments did not speak!because in Explanatory plans All this has been addressed.
Explanatory plan
despite Justifications, a production unit can be implemented by correcting the disadvantages, removing limitations and testing different methods of implementing the idea before starting to work. investment, before doing one investmentfrom the future Investment Be aware and provide different solutions justification, even to know how to deal with problems before they occur in the plan.
Economic studies
This is exactly what is happening in the global economy, but unfortunately sometimes in our country or not at all Explanatory plan There are no managers Industrial and production units They are only looking for someone to pay them Explanatory plan do not receive or pay the minimum cost, and it is clear that the result of this incident is anything but one Explanatory plan Incomplete and copy will not be without Feasibility The desired plan has been written and no care has been taken in providing a solution to the applicant's request.
Fahameh , Service provider Feasibility studies and justification plan،”MANAGEMENT CONSULTATION” And Economic studies To all economic activists, managers and government agencies and the private sector in Oil and gas industry،Car and power and other construction, medical, service, industrial and infrastructure projects of the country.
Wisdom, Quality and Capital
Project control ؛ Investment and management consulting ؛ Investment advice
Feasibility studies in the automotive industry
On this basis Tivan Propulsion Development Company as Investor The private sector designs and manufactures a family of low-consumption engines with Euro 6 emission levels, three cylinders with a power of 143 hp and a torque of 320 Nm and four cylinders with a power of 155 hp and a torque of 250 Nm.…(Read more)
Tougher tools, with nano coating!
Tougher tools, with nano coating!
Nanotechnology and quality
In this Clip Short, the difference between a regular finger mill and Nano finger mill you see.
Hard and resistant coatings created with NanotechnologyIt increases the strength and life of industrial tools several times.
Fahameh The first and only Certified inspection company From Iran's National Qualification Verification Center (NACI) In the field TECHNICAL INSPECTION “Nano technology products ” According to Iran-IAC standard requirements ۱۷۰۲۰ In Iran.
Nano badge ؛Knowledge Base ؛ASSESSMENT & COMPLIANCE
Standardization of nanotechnology products
Nanotechnology The ability to make, control and use matter in nanometer dimensions. Particle size in Nanotechnology It is very important, because in Nano scale, the dimensions of the material are very influential in its properties and properties physical، chemical And biological Individual atoms and molecules are different from the properties of the mass of matter. This size varies from material to material, but typically materials Nano Materials that have at least one of their dimensions smaller than 100 nm are called…(Read more)
Nanotechnology and ISO standard
International Organization for Standardization (To english: The International Organization for Standardization) (To French: International Organization for Standardization) which is usually called Iso (in english: ISO) Known as the International Designation Institute Standard consisting of representatives of institutions National standardization is. This non-governmental organization on a large scale establishes general and partial standards to harmonize different global standards. in practice Iso It operates as a consortium with strong connections with governments. This institution of sorts Global commercial and industrial standards determines. the center Iso It is located in Geneva, Switzerland.IsoIt started its official work on February 23, 1947. This organization promotes global economic and industrial standards to coordinate the exchanges of different industries and techniques…(Read more)
GOODS INSPECTION ؛ Commercialization of knowledge-based products
Standardization of CNG fuel stations
Standardization of CNG fuel stations
Standardization of CNG fuel stations
The 13th session of the Central Committee Supervising the inspection process of tanks, tank milk and CNG stations with the presence of representatives Iran's National Petroleum Products Distribution Company, Ministry of Cooperation, Labor and Social Welfare, Industry trade association C. Ing and Equipment Manufacturers Association, in National Iranian Standards Organization was held.
General director of supervision for energy consumption standards and the environment National Iranian Standards Organization Referring to the existence of 2 thousand 499 CNG He said in the country: More than 2 cases of item Inspection Located and more than 5 stations have been able to fix high -risk defects in the past eleven months..
Ms. Qur'an By stating that this year more than 55 thousand Gas storage tank under pressure of CNG stations It has been inspected and tested, he added: According to the appeal CNG fuel station standard, Next year's plans for revision Checklist Inspection And review the process of doing Save tank test As well as regulating the situation Technical officials Places as Safety observer, Put on the agenda.
C. Ing ؛ Inspection of CNG fuel station
He, the task of the Central Committee of Policy Standardization , Create the unity of procedure to monitor the implementation Periodic inspection of CNG stations Listed in the year and added: As necessary, the central committee meets at least twice a year, and its approvals are sent to the provincial committees for implementation. General offices of standards The provinces of the country are notified.
Fahameh , the company TECHNICAL INSPECTION Qualified by Iran's National Qualification Verification Center(NACI) Based on requirements Iranian standard-ISO IEC ۱۷۰۲۰ In the field of technical inspection “CNG fuel supply stations “in the country.
Inspection of oil and gas equipment ؛ Third party inspection
Safety tips at the CNG fuel station
In order to preserve safety Drivers and occupants Dual -fuel cars, Have a few important points while refueling car Observance…(Read more)
Disregard for the subject Standard and safety Dual-fuel vehicles threaten the lives and finances of citizens, so compliance Safety tips And Standardization take seriously!
Observance of safety tips while refueling CNG car
Trained operators must be responsible for refueling and installing and removing refueling nozzles car To be in charge, so, by no means, refueling operations alone and by the driver or occupants car It should not be done!
ASSESSMENT & COMPLIANCE ؛ Energy Consumption Criteria Inspection ؛Standard culture
Standardization of gas stations
When refueling at gas stations, stop to prevent fire and avoid fire hazards Safety tips and standards particle for direct object…(Read more)
Risk avoidance with standardization
Risk avoidance with standardization
Standardization of the work environment
Imagine a world where safety signs are misleading. From sliding on newly cleaned and slippery surfaces to heartbreaking incidents in construction sites and…Misunderstanding of Safety signs It is the cause of disaster.
while several International Standard Accepted for safety symptoms there, ensure that this Standards Part of the program Risk reduction Organizations are another issue. For this reason, New instructions for effective use of Safety signs It was recently published.
Safety and standardization
The certificate is newly published ISO/TS 20559، Graphic symbols – Colors Safety and safety symptoms – Instructions for expanding and using the login system safe، While organizing and creating transparency in the process, it helps organizations in carrying out the aforementioned actions.
This document contains recommendations and explanations for practical application Safety signs and forming a communication system with a purpose Risk reduction is and complementary International standards Agreed below for Safety signs It is:
- ISO standard 3864 A collection of design principles
- ISO standard 7010 Graphic symbols – Safety colors and safety signs - Recorded safety signs
- ISO 16069 standard, Graphic symbols – Safety signs – Safe route guidance systems (SWGS)
- ISO 23601, Safe identification – Exit and evacuation signs
- ISO 17398 standard, Safety colors and safety signs - Classification, performance and durability of safety signs
This recipe is also complementary ISO standard 45001 Occupational health and safety management systems – Allegations With user guide, is also.
degree ISO/TS 20559 It covers different types of symptoms, from Product labeling taken up to marking Evacuation routes and Equipment markingAlso, training to understand the placement of signs and …
World Standard Organization ؛Issuance of ISO certificate ؛ ASSESSMENT & COMPLIANCE
Standard and consumer safety
formation A new committee on incidents Consumers In the ISO International Organization.Failure of elevators, replacing playground equipment and Defective products There are only some things that the people of the world suffer from on a daily basis! And the first call is accompanied by a complaint…(Read more)
Standardization of safety signs in the workplace
How much of Safety signs Do you know about the famous warning signs of different geometric shapes that we face in some places? Do you know that these symbols can save the lives of several people every year and protect them from Possible risks inform? If you are an employer or personnel whose work environment carries many risks, such as laboratories and buildings or mines, use and know the concept of types Safety signs In work environment Very necessary and mandatory…(Read more)
Standard culture ؛ TECHNICAL INSPECTION ؛ Inspection of oil and gas industry equipment ؛Inspection of automotive industries
ISO and the final piece in the consumer puzzle!
Two big titles Standardization world, International Assembly of Electricity and Electrotechnics (IEC) And Professional technical organization of technology development(IEEE), with help ISO organization to update Standard associated with Consumer affairs have taken action…(Read more)
Iran's entry into the cycle of electricity production from hydrogen
Iran's entry into the cycle of electricity production from hydrogen
Iran's entry into the cycle of electricity production from hydrogen
Hydrogen can be as a resource energy or fuel to be used. attractiveness Hydrogen For these practical uses, it comes from the fact that among all the common fuels, the highest content energy It has a ratio of weight and is about three times ahead of gasoline.
Investment advice
Now from hydrogen, more in context Oil refiningAmmonia production and fuel supply Electric cars used, but policymakers and investors, high potential to use this element in other fields, including transportation (such as shipping, aviation and heavy vehicles), refining metals, generating and storing electricity, heating and creating hybrid fuels.
In this context, the director Iran Renewable Energy and Electricity Productivity Organization(Satba) He said: Hydrogen As the most abundant element in the universe, a carrier energy It is considered desirable and it is hoped that in the not-so-distant future with the reduction of electricity production costs from Fuel cell technology And to solve the country's problems in this field, more attention can be paid to this Technology diverted.
“Muhammad Satkin” Added: Hydrogen As a clean energy carrier and fuel cell as one of the users of this energy carrier Definitely supported Satba organization It has been.
He pointed to the efforts of the countries of the world to find a suitable solution for Development of renewable energy continued: One of the best existing methods is the incentive tariff system and the guaranteed purchase of electricity, which SATBA follows the assigned duties and the existing statutes in all forms. Renewable and clean energies including Hydrogen and fuel cell It supports without any discrimination.
History of hydrogen energy use
In 1966, General Motors Company The first vehicle He built himself, whose fuel was provided by hydrogen. but car Electric van made by this company instead of that Automotive Industry transform it, leave the museum. Half a century later, when we are in it, we are still waiting Hydrogen According to his words, let him know and Energy technology Bring us clean.
Deputy Minister of Energy said:Conducting basic studies (Feasibility, attractiveness analysis and formulation of development strategy Technology Fuel cell in Iran)Compilation of the national strategy document Technology Development Fuel cell, development of operational plan of fuel cell document and its actions in accordance with the national system Innovation (NIS), supporting postgraduate theses in the field Hydrogen and fuel cell And determining the tariff and including fuel cell electricity in the system of guaranteed renewable electricity purchase contracts is one of the results of these measures..
He continued: Hopefully, with the removal of cruel sanctions and the reduction of fuel cell costs, we will see a re-entry Investors and experts in the field of hydrogen and fuel cell in the not so distant future and we will see bright days for the development of this form of clean energy and we will do our best to achieve this goal..
He also has full support Organization of Renewable Energy and Electricity Energy Efficiency of development Hydrogen and fuel cell He announced as one of the forms of clean sources based on guaranteed purchase with an incentive rate.
The boss Satba organization He said: Based on the policy of buying guaranteed electricity from renewable sources, this organization is ready to buy electricity As a result of this Technology based on incentive tariffs.
According to IRNA, Mapna Industrial Group as a large producer Power generation turbines In recent days, since the entry of this group into production Hydrogen turbines had informed.
Energy inspection ؛car ؛Investment advice ؛Feasibility studies
New energies
International agency energy In a new report entitled "The Future Hydrogen: Stealing today's opportunities" in the ministerial meeting Environment And energy The G20 countries in Japan have announced that the number of policies and projects related to Hydrogen It is increasing all over the world, but there are still challenges that need to be overcome. Hydrogen It has high versatility and can solve complex problems energy to solve the world. For example, it has the ability to use parts like Transportation Decarbonize in long distances and production and consumption of chemicals in which it is difficult to reduce the emission of pollutants.(Read more)
GOODS INSPECTION ؛ TECHNICAL INSPECTION ؛Third party inspection ؛
Investment opportunities in Iran
Saeed Zarandi, stating that one of the topics that has been followed for some time in this deputy, the discussion Investment opportunities is, he stated: Considering the scarcity and limitation of resources, it is better New investments To be directed towards new opportunities and needs, two actions have been taken in this direction…(Read more)
Energy label
By studying Energy label Energy-efficient household appliances When buying, we can make a more informed choice and by choosing and buying less energy-efficient household appliances, we not only save money, but we can in turn play a role in reducing production. Environmental pollutants let's have!…(Read more)
A busy year for the International Standard Organization (Iso) and Iran in the field of nano standards
A busy year for the International Standard Organization (Iso) and Iran in the field of nano standards
Nanotechnology and standardization
busy year International Standard Organization (Iso) and Iran in the field Nano standards
With the release of 12 Standard New in 2020, International Standard Organization (ISO) A total of 114 standards in the field Nanotechnology has published that of these 114 Standard، ۸۳ Standard In the technical committee Nano ISO ISO/TC technology 229 published and the rest have been published in other ISO technical committees. Also, about 10% of Standardpublished in the technical committee Nano ISO ISO/TC technology 229 It has been compiled under the responsibility of Iran and with the efforts of Iranian scientists and technologists.
Despite the restrictions of the corona disease in 2020, the technical committee Nanotechnology organization Iso One of his most active years in publishing Nano standards left behind. Based on the information collected in Nano Acetate,ISOBA Compilation and publication of 12 nanotechnology standards In 2020, a total of 114 Standard associated with Nanotechnology has published.
Nanotechnology and standard
Based on the categories defined for Standards, more Nanotechnology standards Published by ISO in 2020 category Test method (Test Method) They were located so that the number Standards 8, 2, 1 and 1 were reported in Test Method, Terminology, Specification and Practice categories respectively.
Nano standard
can be performed Standardpublished in the field Fanarians He has dealt with nanomaterials such as carbon nanotubes, nanoobjects, nanocomposites, nanofibers, nanoparticles, nanostructured materials and topics such as food packaging, air filters, chemical analysis, particle shape and size distribution, and toxicology, and in equipment, transmission electron microscopy and thermal weighing analysis..
Standard and nanotechnical safety ؛Symbol knowledge ؛
Nano and standard logo
It should be noted that ISO/TS international standards 21237:2020 And ISO/TS 21975:2020 In 2020, under the leadership of Iran in the technical committee Nanotechnology standards The ISO organization has been approved. In this committee, there are 37 countries as main members and 18 countries as observer members, and Iran, as the main member of the committee, actively participates in drafting International standards has had
In the table below, there is information including the number, title and link for each of them StandardPublished by ISO organization Presented in 2020.
Fahameh ،The first and only certified inspection company From Iran's National Qualification Verification Center (NACI) In the field TECHNICAL INSPECTION “Nano technology products ” Based on requirements Iranian standard-ISO IEC ۱۷۰۲۰ In Iran.
Nanotechnology Inspection ؛ Inspection of knowledge -based products ؛Product standard inspection ؛ASSESSMENT & COMPLIANCE
A nano step for the development of cars that run on hydrogen
A nano step for the development of cars that run on hydrogen
Nanotechnology and environment
Hydrogen by many countries of the Organization for Economic Cooperation and Development (OECD) It is considered as a major player in the movement towards carbon-free industries and sectors.
with help Nanomaterials With high performance, we can increase the efficiency of breaking the water molecule to produce hydrogen. This "clean" fuel, to reduce greenhouse gas emissions in the sector Transportation General can be effective. Hydrogen fuel is currently being used in several European countries and China. Buses equipped with this Technology, instead of Greenhouse gases They produce water!
For a long time, breaking water molecules into oxygen and hydrogen is done by electrolysis. However, many industrial electrolyzers energy consume and need investmentThey have big ones. INRS and ICPEES researchers were inspired by photosynthesis. They are electrodes Engineering They have produced a special substance that breaks water molecules under sunlight.
Nanotechnology and knowledge-based products
To make the most of solar energy, the research group chose TIO2, a semiconductor known for its sensitivity to UV light.. Ultraviolet rays make up only 5% of the sun's radiation. Using their expertise, this team has first changed the atomic composition of TIO2 and increased its light sensitivity to visible light.. They were able to produce electrodes that can absorb up to 50% of sunlight.
The researchers then manipulated the structure of the electrode scalers, formed a network of TIO2 nanotubes that has a honeycomb-like structure. This method increased the effective surface area of the electrode by a factor of 100,000 or more.
«Nano structure It maximizes the surface-to-volume ratio of the material. for example, NanoTIO2 structures can provide an area of up to 50 square meters per gram. It means that one gram of this substance has an area equal to a small apartment!»
Knowledge Base ؛ Vehicle and Parts Inspection ؛ GOODS INSPECTION
Nanotechnology and automobile
The last stage of development of this electrode is their "nano decoration".. This process involves the deposition of catalyst nanoparticles on the TIO2 nanotube network to increase the efficiency of hydrogen production. For the nano-decoration, the researchers used laser ablation deposition, a field in which Al-Khakani has mastered for the past 25 years.. With this work, not only the challenge of controlling the size, dispersion and settling of catalyst nanoparticles on the TIO2 nanotube matrix was solved, but also other options were found for classical iridium and platinum catalysts..
In this research of cobalt oxide (CoO), a material readily available in Quebec, was used as an effective catalyst for the splitting of water molecules.. A comparison of the two substances showed that Nanoparticles CoO causes a tenfold increase in photocatalytic efficiency in these electrodes Nano New decorated under visible light compared to NanoThe pipes are exposed.
Nanotechnology and standardization
Fahameh ،The first and only certified inspection company From Iran's National Qualification Verification Center (NACI) In the field TECHNICAL INSPECTION “Nano technology products ” Based on requirements Iranian standard-ISO IEC ۱۷۰۲۰ In Iran.
Standard and nanotechnical safety ؛ Inspection of knowledge -based products ؛ Nano badge
Nano badge and production of nano technology products in Iran
The second session of introducing and familiarity with the nano badge, in February, with the presence of representatives of the company and the production unit Nano technology products was held. In this meeting, Hassan Pui Pui, Secretary Nanotechnology Development Standard and Safety Group, First to introduce this headquarters and its achievements in development Nano technology products Pay. He referred to the history, specifications and pillars of the executive NSean NanoDocuments required for…(Read more)
Nanotechnology and automotive industry
Car batteries Now they can at the atomic level Optimization and this will improve performance, longevity and safety They become batteries.
Recent research shows that precise coatings applied on the surface at the atomic scale improve battery life, reduce charging time, and manage heat.…(Read more)
The project of setting up a factory for the production of advanced 3 and 4 cylinder low consumption car engines with 155 horsepower
The project of setting up a factory for the production of advanced 3 and 4 cylinder low consumption car engines with 155 horsepower
پروژه ساخت موتورهای پیشرفته خودرو ۳ و ۴ سیلندر کم مصرف با قدرت ۱۵۵ اسب بخار
شرکت توسعه قوای محرکه تیوان از شرکت های گروه بهمن در طرح کلان ملی، طراحی و تولید خانواده موتورهای ۳ و ۴ سیلندر کم مصرف با سطح آلایندگی یورو ۶ و با حداکثر توان ۱۴۳ تا ۱۵۵ اسب بخار و گشتاور ۲۲۰ تا ۲۵۰ نیوتن متر را در دست اقدام دارد که تا پایان سال جاری فاز نخست آن به بهره برداری می رسد.
Report ستاد توسعه فناوری های حوزه فضایی،حمل و نقل پیشرفته معاونت علمی وفناوری ریاست جمهوری، با توجه به آلودگی هوای کلان شهرها بالاخص در اثر پدیده وارونگی در پاییز و زمستان، از دی ماه سال ۹۲ با محوریت Vice President of Science and Technology، حمایت از بخش خصوصی Knowledge Base جهت ارتقای فناوری automotive industry و تولید موتورهای کم مصرف و مطابق آلایندگی روز دنیا دردستور کار قرار گرفت.
On this basis Tivan Propulsion Development Company as Investor The private sector designs and manufactures a family of low-consumption engines with Euro 6 emission levels, three cylinders with a power of 143 hp and a torque of 320 Nm and four cylinders with a power of 155 hp and a torque of 250 Nm..
Industrial engineering company Fhamh, With the backing of years of experience and activity in Automotive Industry کشور، مجری خدمات انجام Feasibility studies “طرح تولید،طراحی و ساخت موتور سه سیلندر با فناوری بالا(پرقدرت و کم مصرف یورو۶)” براساس ضوابط بانک عامل این Project It is.
با اتمام طراحی، نمونه سازی و پشت سرگذاشتن موفق آزمون های عملکردی و دوام، اولین نمونه از این engine در مردادماه سال ۹۵ با حضور مقامات عالی رتبه کشور به طور رسمی رونمایی و پس از آن Investment برای ایجاد خطوط تولید، صنعتی سازی و تولید انبوه این خانواده موتور با Technology بالا آغاز شد. در حال حاضر نصب و راه اندازی ماشین آلات و بزرگترین خط تولید موتور در کشور با ظرفیت ۵۰۰ هزار دستگاه در سال، مراحل پایانی خود را طی می نماید و بهره برداری از فاز نخست تا پایان سال جاری انجام خواهد شد.
با بهره برداری از این طرح کلان ملی تا پایان سال، تولید انبوه موتورهای با فناوری بالا و کم مصرف در محدوده ۵ لیتر در ۱۰۰ کیلومتر بر روی Passenger cars اجرا و یکی از منویات مقام معظم رهبری در سال جهش تولید محقق خواهد شد.
Vehicle standardization
همچینین به منظور اطمینان از تداوم چرخه نوآوری و توسعه و بروزرسانی محصولات، طی Investment مشترک انجام شده تیوان با دانشگاه تهران و معاونت علمی وفناوری ریاست جمهوری، آزمایشگاه ملی و مرکز نوآوری قوای محرکه پیشرفته ( الکتریکی، هیبریدی، احتراقی) برای انواع خودروهای سبک و سنگین تا توان ۴۳۰ kw به عنوان اولین و مجهزترین مرکز آزمون و توسعه قوای محرکه الکتریکی و احتراقی کشور تا سطح Standard یورو ۶ ایجاد گردیده است که تا پایان به بهره برداری خواهد رسید.
برای ایجاد این Laboratory بالغ بر ۱۰۰۰ میلیارد ریال Investment مشترک بین صنعت و دانشگاه صورت پذیرفته است و با آغاز به کار، دانشگاه تهران در بین ۵ دانشگاه برتر دنیا در حوزه طراحی و آزمون قوای محرکه پیشرفته قرار می گیرد.
Industrial engineering company Fhamh, With the backing of years of experience and activity in Automotive Industry ،دارای سوابق همکاری دیرینه ومداوم با شرکت های ساپکو( Iran Khodro) And Sazeh Gostar (Saipa) In the field of services Quality Engineering (including product development and standardization based on quality management systems and…) And Vehicle and Parts Inspection (Product Adit and Process, Final Product Inspection and …) و نیز ارائه دهنده خدمات مطالعات امکانسنجی و مطالعات اقتصادی در صنعت خودرو و نیرومحرکه، آماده همکاری با شرکت های تولیدکننده انواع Cars and motorcycles Is at the country level.
محصولات دانش بنیان و استانداردسازی
In order to increase the quality Products Knowledge Base و ارتقای سطح و کیفی و Standard این محصولات و حمایت از صادرات…(ادامه مطالب)
مشاوره سرمایه گذاری و مشاوره مدیریت
شرکت توسعه قوای محرکه تیوان، با تولید نسل جدید موتورهای کم مصرف مطابق با Standard آلایندگی یورو ۶ و با میانگین قدرتی بین ۸۵ تا ۱۴۳ اسب بخار، اشتغالزایی برای بیش از ۴۰۰۰ نفر را فراهم آورده است. این پروژه بزرگترین سرمایه گذاری صنعت خودرو در دهه گذشته است که فاز نخست آن…(Read more)
Car airbag, safety in a fraction of a second!
Car airbag, safety in a fraction of a second!
Airbag Car
Although Airbag with the name "The airbagWe know, but basically what caused the opening Airbag It may not be the air we breathe at all and it is a series of chemical reactions that cause bloating Airbag will be.
Most of us think that an explosion is a very scary event, but that is not always the case!. Every day explosions save people's lives! If you ever have an accident, with a controlled explosion, an airbag will pop out from inside the dashboard and take the impact caused by Accident, reduces the damage to your body. mechanism Air bag performance Very simple but smart.
Of course, in the first ideas that half a century ago for Airbag It was proposed to use compressed air, but the big problem of using compressed air is the storage of compressed air for a long time, because a source of compressed air cannot keep compressed air forever, and it needs to be recharged frequently so that it can act on time when necessary, and this problem also requires a charging system. car creates that is not a good idea.
Car safety
In contrast, however Automobile manufacturers They were looking for better solutions and finally chemical engineers in cooperation with engineers automotive industry They were able to find the final solution; Using a substance that can produce a lot of gas when burning so that this gas can be used to inflate Airbag used.
Chemicals generally produce gas when they burn and increase in volume, and it may seem like an easy solution to the problem, but not every chemical can be used for this purpose.. The material used for the airbag must first burn at a very high speed in order to produce a large volume of gas in a fraction of a second..
In addition, the produced gas should not be toxic, and the produced gas should not be too hot, as it may cause burns. Airbag which is made of nylon and will eventually harm the driver and passengers. Considering all this, different materials are used for this purpose Test placed until finally Automobile manufacturers were able to combine magic NaN3 or, as it is more commonly called, to obtain sodium azide, a compound now widely used in airbags is used.
This material burns quickly when exposed to a flame, and the result of its burning, which is at a temperature of about 300 degrees, is a significant volume of N2 or nitrogen gas, and it is exactly this gas that is released that fills the air bag.. All these events are done in less than a hundredth of a second.
Vehicle standardization
Required to install two airbag To Passenger cars Required to install stands for ABS For the kidney car and the requirement to install fire extinguishers, which in Standards And EU laws are not mandatory…(Read more)
Technical inspection and during manufacturing of car parts
Industrial engineering company Fhamh, With the backing of years of experience and activity in Automotive Industry Country, contract parties with the company “Structural Engineering and Counseling” In the field of services Quality Engineering (Inclusive Product development and standardization Based on quality management systems…) And Vehicle and Parts Inspection (Product Adit and Process, Final Product Inspection and …) To the manufacturers of all kinds Cars and motorcycles In Iran.
Related ؛Confirmation of vehicle type ؛ TECHNICAL INSPECTION ؛ Vehicle and Parts Inspection ؛ ASSESSMENT & COMPLIANCE ؛ Standard
Car safety
As much as we are able to possibly Risk Decrease or in the face of Risk, Reduce the amount of injuries, the level safety We have increased. The performance of individual parts, in efficiency Automobile and safety It is effective, therefore, the subject safety one car can be divided into two parts…(Read more)
Standardization of CNG fuel stations
cars that with Compressed natural gas fuel CNG work, they need a place for refueling where they can pressurize their storage tanks bar fill in 200. This place is a gas station CNG It is called. According to the method refueling and equipment…(Read more)
Never put your foot on the car dashboard!
Never put your foot on the car dashboard!
Vehicle safety and standards
Putting your foot on the dashboard, unfortunately, is almost or sometimes a common practice among passengers caris. People say that this is done during long journeys or the continuous deployment of passengers car, creates a more comfortable situation.
Car airbag and Standard
The opening speed of car airbags ranges from 161 km per hour to 354 km per hour. This force is enough to keep the human body in a car accident. So an object in front Car airbag, can easily cause serious injuries.
Motorcycle safety
Innovation in the production of casket hats Motorcycle!
Although in appearance this Helmet Smart looks to the future because of its special design, but it must be admitted to develop technology. Motorcycles, Outline Safety helmets نیز متنوع تر…(Read more)
شدّت باز شدن Car airbag To the extent that a person's foot can be placed on the dashboard car He has bent and hit a person's knee on his face and even broken his nose and other parts of his face.. Also the passenger's ankle, thigh and arm car It can also cause serious injuries or even severe fractures.
Industrial engineering company Fhamh, With the backing of years of experience and activity in Automotive Industry Country, contract parties with the company “Structural Engineering and Counseling” In the field of services Quality Engineering (including product development and standardization based on quality management systems and…) And Vehicle and Parts Inspection (Product Adit and Process, Final Product Inspection and …) To the manufacturers of all kinds Cars and motorcycles In Iran.
Standardization of CNG fuel stations
In line with the promotion Safety and standards At fuel stations C. Ing, dual-fuel vehicles, according to the requirements National Iranian Standard, these fuel stations, periodically by partner inspection companies National Iranian Standards Organization And Standard provincial general offices Assessed country and TECHNICAL INSPECTION placed and …(Read more)
Related ؛Confirmation of vehicle type ؛ TECHNICAL INSPECTION ؛ Vehicle and Parts Inspection ؛ ASSESSMENT & COMPLIANCE ؛ Standard